Standard Stair Rise and Run

in

Type it the way you read the tape: 68 1/2, 5' 8 1/2", 68.5 or 174cm.

Type your total rise and the answer appears here.

Code check runs as you type
Where to measure
Where to measure total riseTotal risemeasure straight downlevel off the finished deckdeck or floorfinished ground or floor

Measure from the top of the finished upper floor or deck straight down to where the bottom step will land. Not level ground? Measure at the landing spot.

Drag, or use the arrow keys
AdjustTread, riser, lumber, nosing, units — the drawing updates as you go

Steps

Top of stair

Lumber

Stringer stock

Space (optional)

Show results in

Cut sheet

Your marks, cuts and shopping list fill in here.

Code check

  • Runs as soon as you enter a total rise.

Based on the IRC (2021 R311.7 / 2024 R318.7). Local codes vary — confirm with your building department before building.

The relationship between stair rise (vertical height per step) and stair run (horizontal depth per tread) determines whether stairs feel natural and safe, or steep and awkward. While building codes mandate legal safety limits, carpenters use ergonomic comfort formulas to dial in a natural stride.

Use the rise and run calculator above to test your elevation and find the ideal balance between legal code requirements and walking comfort.


How to Use This Rise and Run Calculator

  1. Enter your total rise: Measure the vertical distance from finished lower floor to finished upper floor.
  2. Adjust your target tread run: Under Adjust, test different tread depths (typically 10”, 10 1/2”, or 11”) to see how your staircase fits your room layout.
  3. Check comfort rules and code badges: The calculator evaluates your proportions against IRC limits (max 7 3/4” rise, min 10” run) and classic ergonomic formulas (2R + T).

How Stair Rise and Run Is Calculated

Stair design involves two standards: legal building codes (what passes inspection) and ergonomic comfort rules (what feels natural).

In the US, the International Residential Code (IRC) governs residential stair dimensions:

2. Traditional Ergonomic Comfort Formulas

A staircase can meet building code minimums and still feel awkward to climb. For example, a 5-inch rise with a 10-inch run is code-legal, but forces an unnatural stride.

Carpenters use three classic proportions:

Blondel’s Comfort Rule (2R + T)

Introduced in 1675 by French architect François Blondel, this rule reflects human gait: lifting a foot vertically takes about twice the effort of stepping forward:

2 × Rise + Tread = 24" to 25"

Stairs that land between 24 and 25 inches (or up to 26 inches outdoors) feel natural and comfortable.

The Sum Rule (R + T)

A practical framers’ rule of thumb:

Rise + Run = 17" to 18"

A 7-inch rise paired with a 10 1/2-inch run equals 17.5 inches.

The Product Rule (R × T)

Another standard check:

Rise × Run ≈ 70 to 75

A 7-inch rise times a 10.5-inch run equals 73.5, squarely in the target range.


Worked Example: 68 1/2” Total Rise Comparison

Evaluating a residential flight with 68 1/2 inches total rise and 10 1/2-inch tread depth:


Residential Stair Code Limits (IRC R311.7 / R318.7)

Never compromise safety minimums for aesthetic preferences:

Code Dimension IRC Requirement Safety Significance
Maximum Riser Height 7 3/4 inches (197 mm) Prevents steep climbs and backward falls
Minimum Tread Depth 10 inches (254 mm) Ensures full foot placement descending
Tread Nosing 3/4” to 1 1/4” Required when tread run is under 11”
Step Variation 3/8 inch (9.5 mm) Inconsistent steps break stride and trigger trips
Minimum Headroom 6 feet 8 inches (80”) Prevents head strikes during descent
Minimum Clear Width 36 inches Ensures emergency egress clearance
Handrail Requirement Required at 4+ risers Mounted 34” to 38” above tread nosings
Max Flight Rise 151 inches (12’ 7”) Requires an intermediate landing
Landing Minimum 36” in travel path Resting platform at top and bottom

Based on the IRC (2021 R311.7 / 2024 R318.7). Local codes vary — confirm with your building department before building.


Frequently Asked Questions

What is the ideal stair rise and run?

A 7-inch to 7 1/4-inch rise paired with a 10-inch to 10 1/2-inch run feels most natural: every combination in that range puts Blondel’s 2R + T between 24 and 25 inches, and stays within IRC code limits (7 3/4” max rise, 10” min run).

What is the maximum rise and minimum run allowed by code?

Under IRC Section R311.7.5, the maximum allowable riser height for residential stairs is 7 3/4 inches (197 mm), and the minimum allowable tread depth is 10 inches (254 mm).

What is the 7-11 rule for stairs?

The 7-11 rule is a historic rule specifying a 7-inch riser and 11-inch tread. Commercial building codes (IBC) often mandate 7” maximum risers and 11” minimum treads, whereas residential code (IRC) permits up to 7 3/4” risers and 10” treads.

Why is stair consistency more important than step height?

The human brain memorizes stair rhythm after two steps. A variation as small as 3/8 inch between steps interrupts this unconscious rhythm, causing occupants to trip going up or slip going down.

How do I calculate rise and run from total rise?

Divide total rise by 7.75 and round up to find riser count. Divide total rise by this count to get unit rise. Choose a tread depth of at least 10” (typically 10.5”), and multiply by risers minus one for total run.

Does a steeper stair angle meet building code?

Stairs with a 7 3/4” rise and 10” run produce an angle of 37.8 degrees, which is the steepest angle permitted under residential IRC codes. Standard comfortable stairs pitch between 34 and 36 degrees.